IMEC - Mechanical Engineering

IMEC-1000 Introduccion a la Ingenieria Mecanica

This course presents the student with a general vision of the most important areas in Mechanical Engineering, and also their impact on the current technological society. Topics about fundamentals of engineering design, materials engineering, manufacturing processes, energy,English,- conversion, machine design and construction are discussed from several points of view, both empirical and analytical.

Credits

3

Distribution

-

IMEC-1000L IMEC 1000L

Credits

0

IMEC-1000T Trabajo Asistido Introduccion Ingenieria Mecanica

Credits

0

Distribution

-

IMEC-1001 Fundamentos de Experimentación

This course trains students in the planning, conduction and socialization of experiments under within the context of the real engineering practice. Special focus is placed on the correct measurement of physical variables that are common in engineering. The course covers topics like: unit systems, measurement of basic physical variables, collection and analysis of data, etc.

Credits

3

Distribution

-

IMEC-1001L Fundamentals of Experimentation Lab

This course trains students in the planning, conduction and socialization of experiments under within the context of the real engineering practice. Special focus is placed on the correct measurement of physical variables that are common in engineering. The course covers topics like: unit systems, measurement of basic physical variables, collection and analysis of data, etc.

Credits

0

IMEC-1000 Introduccion a la Ingenieria Mecanica

This course presents the student with a general vision of the most important areas in Mechanical Engineering, and also their impact on the current technological society. Topics about fundamentals of engineering design, materials engineering, manufacturing processes, energy,English,- conversion, machine design and construction are discussed from several points of view, both empirical and analytical.

Credits

3

Distribution

-

IMEC-1000 Introduccion a la Ingenieria Mecanica

This course presents the student with a general vision of the most important areas in Mechanical Engineering, and also their impact on the current technological society. Topics about fundamentals of engineering design, materials engineering, manufacturing processes, energy,English,- conversion, machine design and construction are discussed from several points of view, both empirical and analytical.

Credits

3

Distribution

-

IMEC-1330 Termodinámica

Thermodynamics is the first of four courses required in the energy conversion area. This course focuses on the understanding and application of the first and second law of thermodynamics to the analysis of basic macroscopic thermodynamic systems. Thus, it deals with the study of the various energy forms and its transference through the system boundaries in the forms of heat and work. Additionally, pure substances are studied and closed and open systems are analyzed. The course is complemented with the study of the Otto, Diesel, and Brayton power cycles.

Credits

3

Distribution

-

IMEC-1330L Laboratorio de Termodinámica

Thermodynamics is the first course of a series of four mandatory courses in the area of Energy Conversion. This course focuses on the understanding of the first and second laws of thermodynamics for the analysis of basic macroscopic systems (closed and open) and their interaction with the surroundings. As such, emphasis will be given to the study of different energy forms and its transfer through the boundaries of a system as heat or work. Additionally, the properties of pure substances will be studied. The course will finish with the study of power cycles (Otto’s cycle, Diesel cycle and Brayton’s cycle).

Credits

0

Distribution

-

IMEC-1410 Ciencia de Materiales

This course gives the student a conceptual framework for understanding the behavior of materials in engineering: metals, polymers, ceramics and composites. This course emphasizes in the relation between the structure at several scales (nano, micro and macro scale) and the physical and mechanical properties of materials in order to understand the mechanical processes of fabrication as well as treatments to modify properties.

Credits

3

Distribution

-

IMEC-1410L Materials Science Lab

This course gives the student a conceptual framework for understanding the behavior of materials in engineering: metals, polymers, ceramics and composites. This course emphasizes in the relation between the structure at several scales (nano, micro and macro scale) and the physical and mechanical properties of materials in order to understand the mechanical processes of fabrication as well as treatments to modify properties.

Credits

0

IMEC-1503 Diseño Grafico en Ingeniería

This course deals with drawing as an engineering language and shows how it constitutes a powerful tool of design and communication. The course is based on projects that challenge and create the need in the student of transmitting his/her ideas through the use of contemporary techniques and tools of computer aided design (CAD).

Credits

3

Distribution

-

IMEC-1503L Laboratorio de Diseño Gráfico

This course deals with drawing as an engineering language and shows how it constitutes a powerful tool of design and communication. The course is based on projects that challenge and create the need in the student of transmitting his/her ideas through the use of contemporary techniques and tools of computer aided design (CAD).

Credits

0

Distribution

-

IMEC-1503T Trabajo Asistido Diseño Grafico en Ingenieria

Credits

0

Distribution

-

IMEC-1541 Mecanica de Solidos Rigidos

This is the first course of a series of three courses in the area of Mechanical Systems in the Mechanical Engineering Program. This course focuses on the basic concepts of applied mechanics in engineering (free body diagram, degrees of freedom, Newton’s laws, etc). This course is structured in three parts: the first part is dedicated to fundamentals; the second part is dedicated to statics of particles, bodies and systems; the third part is dedicated to dynamics of particles (kinematics and kinetics; motion in a plane, conservation of energy and linear momentum).

Credits

3

Distribution

-

IMEC-1541 Mecanica de Solidos Rigidos

This is the first course of a series of three courses in the area of Mechanical Systems in the Mechanical Engineering Program. This course focuses on the basic concepts of applied mechanics in engineering (free body diagram, degrees of freedom, Newton’s laws, etc). This course is structured in three parts: the first part is dedicated to fundamentals; the second part is dedicated to statics of particles, bodies and systems; the third part is dedicated to dynamics of particles (kinematics and kinetics; motion in a plane, conservation of energy and linear momentum).

Credits

3

Distribution

-

IMEC-1541L Rigid Body Mechanics Lab

This lab focuses on the basic concepts of mechanics applied to engineering (free-body diagram, Newton’s laws, particles and solid bodies’ equilibrium, friction, structures and trusses analysis, etc.).

Credits

0

IMEC-1600 Seminario del Grupo de Integridad Estructural

Credits

0

Distribution

-

IMEC-1601 Robocol Group Seminar

Credits

0

Distribution

-

IMEC-1700 Seminario Giap

Automation and production research group seminar where participants demonstrate their progress in the research topics they are working on.

Credits

0

Distribution

-

Instructor

Rodriguez Herrera Carlos

IMEC-1800 Seminario de Mecánica Computacional

Credits

0

Distribution

-

IMEC-1997 HSEQ I

Credits

0

Distribution

-

IMEC-2070 Monitoria de Ingenieria Mecanica

Course administered by the department for outstanding students selected as academic supervisors, based on Article 89 of the General Undergraduate Program Students Regulation (January 2007)

Credits

0

Distribution

-

IMEC-2070 Monitoria de Ingenieria Mecanica

Course administered by the department for outstanding students selected as academic supervisors, based on Article 89 of the General Undergraduate Program Students Regulation (January 2007)

Credits

0

Distribution

-

IMEC-2070 Monitoria de Ingenieria Mecanica

Course administered by the department for outstanding students selected as academic supervisors, based on Article 89 of the General Undergraduate Program Students Regulation (January 2007)

Credits

0

Distribution

-

IMEC-2070 Monitoria de Ingenieria Mecanica

Course administered by the department for outstanding students selected as academic supervisors, based on Article 89 of the General Undergraduate Program Students Regulation (January 2007)

Credits

0

Distribution

-

IMEC-2071 IMEC-2071

Distribution

-

IMEC-2070 Monitoria de Ingenieria Mecanica

Course administered by the department for outstanding students selected as academic supervisors, based on Article 89 of the General Undergraduate Program Students Regulation (January 2007)

Credits

0

Distribution

-

IMEC-2070 Monitoria de Ingenieria Mecanica

Course administered by the department for outstanding students selected as academic supervisors, based on Article 89 of the General Undergraduate Program Students Regulation (January 2007)

Credits

0

Distribution

-

IMEC-2210 Mecanica de Fluidos

This is an introductory course that belongs to the basic sciences of engineering. It is focused on the study of the most important physical properties of fluids and the basic mathematical models that allow to describe, analyze and control their behavior, in common static and dynamical conditions. The course is essentially theoretical, although some applications are treated. Experimental and practical aspects of engineering practice related to fluid mechanics are also discussed.

Credits

3

Distribution

-

IMEC-2210L Laboratorio de Mecanica Fluidos

The course is focused on the study of the most important physical properties of fluids and the basic mathematical models that allow to describe, analyze and control their behavior, in common static and dynamical conditions. The course is essentially theoretical, although some applications are treated. Experimental and practical aspects of engineering practice related to fluid mechanics are also discussed.

Credits

0

Distribution

-

IMEC-2320 Transferencia de Calor

This course focuses on the key topics of conduction, convection, and radiation. One-dimension conduction is studied analytically for steady and transient state conditions whereas twodimension conduction problems are analyzed basically using numerical and graphical methods. Forced convection analyses are considered for internal and external (turbulent and laminar) flows while natural and mixed convection conditions are considered only for external flows. Additionally, the course is complemented with the analysis of radiation problems for black and gray surfaces separated by nonparticipating media. During the development of the course, the students are encouraged to use the Engineering Equation Solver (EES) software in the Engineering problem solutions.

Credits

3

Distribution

-

IMEC-2320L Laboratorio de Transferencia de Calor

In this lab the basic heat transfer mechanisms are studied: conduction, convection and radiation. In conduction, steady- state and transient situations are considered. Analytical, numerical and graphical methods are used. The study of convection includes boundary layers, laminar and turbulent flows, as well as forced, free and mixed conditions, for both internal and external flows. The discussion of radiation comprises ideal and real emitters of thermal radiation, and the radiant exchange between opaque surfaces.

Credits

0

Distribution

-

IMEC-2411 Ingeniería de Materiales

Having learned the properties and basic applications of the main material families, this course seeks to introduce the student into the world of structures control in its most relevant scales. This approach allows giving more precision to the selection criteria for the design of processes and products, taking into account the internal structure of the material. It is also desired that the knowledge acquired is contextualized with the national technological reality and that it is used to motivate innovation. The objective of the course will be achieved through the study of the different families of materials, particularly metals, ceramics and polymers. This study will be carried out with the following sequence: i. Generalities-introduction, ii. Structures, iii. Properties, iv. Manipulation-volumetric and superficial properties, v. Composites from this material family. The execution of projects will be the application center and contextualization of the gained knowledge.

Credits

3

Distribution

-

IMEC-2411L Materials Engineering Lab

Having learned the properties and basic applications of the main material families, this course seeks to introduce the student into the world of structures control in its most relevant scales. This approach allows giving more precision to the selection criteria for the design of processes and products, taking into account the internal structure of the material. It is also desired that the knowledge acquired is contextualized with the national technological reality and that it is used to motivate innovation. The objective of the course will be achieved through the study of the different families of materials, particularly metals, ceramics and polymers. This study will be carried out with the following sequence: i. Generalities-introduction, ii. Structures, iii. Properties, iv. Manipulation-volumetric and superficial properties, v. Composites from this material family. The execution of projects will be the application center and contextualization of the gained knowledge.

Credits

0

Distribution

-

- IMEC-2428B

IMEC-2520 Mecanica Solidos Deformables

The main purpose of this course is to provide the fundamentals of structural design from a unified treatment of applied mechanics. The constant demand of machine structures and components ever more sophisticated, require the engineer to have a clear understanding of the stress and strain components, and of material properties. From this, the course must deliver the student the ideas and information necessary to understand the basic concepts of deformable body mechanics and, with this, give impulse to the creative process for design.

Credits

3

Distribution

-

IMEC-2520L Deformable Body Mechanics Lab

The main purpose of this course is to provide the fundamentals of structural design from a unified treatment of applied mechanics. The constant demand of machine structures and components ever more sophisticated, require the engineer to have a clear understanding of the stress and strain components, and of material properties. From this, the course must deliver the student the ideas and information necessary to understand the basic concepts of deformable body mechanics and, with this, give impulse to the creative process for design.

Credits

0

Distribution

-

- IMEC-2521

- IMEC-2521

IMEC-2540 Dinamica de Sistemas Mecanicos

Mechanics of Dynamical Systems is the second course in a series of three required courses in the area of Mechanical Systems in the Mechanical Engineering Program. This course focuses on the study of the behavior of dynamical systems with one and two degrees of freedom. It allows the student to perform basic analysis of the vibration dynamics of mechanical systems, while also introducing the basic concepts of rigid body dynamics in two dimensions.

This course deals with the study of the dynamic behaviour of one degree of freedom mechanical systems. The course enables the capacity to analize the rigid body dynamics in two dimensions as well as the vibration dynamcs of mechanical systems.

Credits

3

Distribution

-

IMEC-2540L Laboratorio de Dinamica de Sistemas Mecanicos

This course deals with the study of the dynamic behaviour of one degree of freedom mechanical systems. The course enables the capacity to analize the rigid body dynamics in two dimensions as well as the vibration dynamcs of mechanical systems.

Credits

0

Distribution

-

IMEC-2543 Dinamica de Maquinaria

This course approaches the analysis and synthesis of mechanisms and machines, from the motion point of view. In the course, the associated forces and required power for the operation of those machines are estimated,  analyzing the power transmission elements used to move them.

Credits

3

Distribution

-

IMEC-2543L Dynamics of Machinery Lab

This course approaches the analysis and synthesis of mechanisms and machines, from the motion point of view. In the course, the associated forces and required power for the operation of those machines are estimated,  analyzing the power transmission elements used to move them.

Credits

0

Distribution

-

- IMEC-2550L

IMEC-2700 Proyecto Intermedio

Intermediate project is the second course of the program’s project sequence, constituted additionally by the courses Introduction to Mechanical Engineering and Degree Project. The main objective of the course is the formal development of a ME project, through the application of specific tools of this discipline. This project will invariably have the following elements: The exploration of the context in which a project is carried out (local industrial environment, as well as social, legal, economic and environmental aspects, among others).This course promotes: learning and feedback from peers, contextualized application of concepts, models and techniques learned during the first half of the program, and preparation of project results (reports, oral presentations, etc.).

Credits

3

Distribution

-

IMEC-2700T Trabajo Asistido Proyecto Intermedio

Credits

0

Distribution

-

IMEC-2797 HSEQ II

Credits

0

Distribution

-

IMEC-3201 IMEC-3201

Distribution

-

IMEC-3250 Aerodinamica Basica

Credits

3

Distribution

-

IMEC-3310 Energía: Escenario Global y Desarrollo Sostenible

Credits

3

Distribution

-

IMEC-3331 Refrigeracion y Aire Acondicionado

Credits

3

Distribution

-

IMEC-3345 Sistemas Conversion de Energia

The main objective of this course is to give the student an integral vision of the industrial systems and equipment of energy conversion (be it for supply or consumption), and to make us of the basic principles of engineering to analyze the behavior of those systems and equipment. The course is oriented toward the development of knowledge that allow the analysis, design and selection of energy conversion equipment that are frequently used in industry.

Credits

3

Distribution

-

IMEC-3345L Laboratorio de Sistemas de Conversión de Energia

The main objective of this course is to give the student an integral vision of the industrial systems and equipment of energy conversion (be it for supply or consumption), and to make us of the basic principles of engineering to analyze the behavior of those systems and equipment. The course is oriented toward the development of knowledge that allow the analysis, design and selection of energy conversion equipment that are frequently used in industry.

Credits

0

Distribution

-

- IMEC-3350

IMEC-3460 Sistemas de Manufactura

The course deals with topics related to the manufacturing of industry’s secondary sector products. Emphasis will be given to the fundamental principles of manufacturing processes. Required technologies for the transformation of materials into products will be presents, with a generic focus constituted by the following questions: what systems are there?, what are their specifications?, and what are the functional elements of the system in a manufacturing facility. The students will develop skills to estimate flow of materials, energy and time, as well as the costs of required personnel for the fabrication of elements and products; basic tools to compete in the market. Coursework includes workshops and a project that demands organization and execution of administrative tasks, along with teamwork management.

Credits

3

Distribution

-

IMEC-3460L Manufacturing Systems Lab

The course deals with topics related to the manufacturing of industry’s secondary sector products. Emphasis will be given to the fundamental principles of manufacturing processes. Required technologies for the transformation of materials into products will be presents, with a generic focus constituted by the following questions: what systems are there?, what are their specifications?, and what are the functional elements of the system in a manufacturing facility. The students will develop skills to estimate flow of materials, energy and time, as well as the costs of required personnel for the fabrication of elements and products; basic tools to compete in the market. Coursework includes workshops and a project that demands organization and execution of administrative tasks, along with teamwork management.

Credits

0

IMEC-3460 Sistemas de Manufactura

The course deals with topics related to the manufacturing of industry’s secondary sector products. Emphasis will be given to the fundamental principles of manufacturing processes. Required technologies for the transformation of materials into products will be presents, with a generic focus constituted by the following questions: what systems are there?, what are their specifications?, and what are the functional elements of the system in a manufacturing facility. The students will develop skills to estimate flow of materials, energy and time, as well as the costs of required personnel for the fabrication of elements and products; basic tools to compete in the market. Coursework includes workshops and a project that demands organization and execution of administrative tasks, along with teamwork management.

Credits

3

Distribution

-

IMEC-3501 Impresión 3D

Credits

3

Distribution

-

- IMEC-3502

IMEC-3504 Ingeniería Básica de Motocicletas

Credits

3

Distribution

-

- IMEC-3520

IMEC-3530 Diseño de Sistemas Mecanicos

The purpose of this course is to expose students to problematic situations that simulate, with some limitations, the conditions in which mechanical systems are designed during the professional practice. That is, situations that must be solved from the best possible information that can be collected, and within a determined timeframe and available budget. In this course, the  projects are developed in work teams, which is common in professional working environments.

Credits

3

Distribution

-

IMEC-3530 Diseño de Sistemas Mecanicos

The purpose of this course is to expose students to problematic situations that simulate, with some limitations, the conditions in which mechanical systems are designed during the professional practice. That is, situations that must be solved from the best possible information that can be collected, and within a determined timeframe and available budget. In this course, the  projects are developed in work teams, which is common in professional working environments.

Credits

3

Distribution

-

IMEC-3530L Design of Mechanical Systems Lab

The purpose of this course is to expose students to problematic situations that simulate, with some limitations, the conditions in which mechanical systems are designed during the professional practice. That is, situations that must be solved from the best possible information that can be collected, and within a determined timeframe and available budget. In this course, the  projects are developed in work teams, which is common in professional working environments.

Credits

0

IMEC-3533 Programacion de Robots Industriales

Credits

2

Distribution

-

- IMEC-3540

- IMEC-3540L

- IMEC-3602

IMEC-3700 Graduation Project Seminar

This seminar aims at two main objectives. The first one is to instruct students that are close to undertaking their graduation project, in some aspects of practical nature for its successful development. The second one is to introduce students to topics related to their future professional life, the regulation of the ME profession in Colombia, their possibilities of professional development, entrepreneurship, the profession development trends, engineering ethics, etc.

Credits

0

Distribution

-

IMEC-3701 Proyecto de Grado

The graduation project is an individual project, developed by last year students, that consists of the study of concrete problems of an application area of Mechanical Engineering, and is developed under the direction of an advisor professor (supervisor). The project can have diverse emphasis that can include design and construction, modeling and simulation, or experimental validation of models. As a conclusion, the student submits a final report that is included in the collection of the University’s Library System.

Credits

3

Distribution

-

IMEC-3702 Problema Especial

This course is a short project led by a department full-time professor, who authorizes a student to conduct it.

Credits

3

Distribution

-

- IMEC-3703

- IMEC-3704

- IMEC-3707

- IMEC-3707

- IMEC-3707

- IMEC-3707

IMEC-3991 Práctica Profesional Completa

The Professional Practice is a learning alternative that complements the academic activities. It is based on the experience that students can have when they are immersed in the context of companies and institutions.

Credits

6

Distribution

-

IMEC-3992 Prerrequisito Practica

Credits

0

Distribution

-

IMEC-3997 Safety Trainning

Credits

0

Distribution

-

IMEC-4000 Tecnicas de Experimentacion e Instrumentacion

The objective of this course is to introduce students to the experiment design theory and practice, the apparatuses used to measure the most important physical variables, the methodology used to measure such variables, the management of signals and the analysis of errors. The course contents include: Experimental design (basic statistics), probability distributions, hypothesis testing, median comparison, variance analysis and trust intervals), quality control applications. Manipulation, transmission and data recording (regressions, frequency analysis, filtering). Measuring systems (applications, set-up and description of measuring instruments, and instrument performance characteristics) Basic programming and algorithms. Practical projects.

Credits

4

Distribution

-

IMEC-4001 Applied Mathematics

Vectorial n-dimensional spaces. Lineal operators, self-value theory, Jordan forms and application to ordinary equations. Differential vectorial operations: escalation and vectorial field gradients, divergence and rotational, total derivatives, vectorial operators in mechanics. Balance problems: discrete, continuous, orthogonal expansion solution, non-linear problems and linearization. Dynamic problems: symmetric and continuous problem solving, modal analysis, orthogonal expansion solution for diffusion problems, Fourier transform. Finite elements: variational problems on spaces with discrete functions.

Credits

4

Distribution

-

IMEC-4070 Asistencia Graduada Ingenieria Mecanica

Credits

0

Distribution

-

- IMEC-4105

IMEC-4112 Caracterización Dinámica de Materiales

Credits

4

Distribution

-

IMEC-4113 Mecánica de la Fractura y la Fatiga

Credits

4

Distribution

-

- IMEC-4115

- IMEC-4116

- IMEC-4117

IMEC-4121 Meca Avanzada de Materiales

Credits

4

Distribution

-

IMEC-4122 IMEC-4122

Distribution

-

IMEC-4200 Mecanica de Fluidos Avanzada

Credits

4

Distribution

-

IMEC-4203 Combustion

Credits

4

Distribution

-

- IMEC-4208

IMEC-4210 Cfd Dinámica Comput Fluidos

Credits

4

Distribution

-

IMEC-4214 Transferencia de Calor Avanzada

This is a first course of computer networks. Under a top-down approach, it presents each one of the levels that compose the protocol stack of a network, with special emphasis in TCP/IP that is in the base of the Internet. TCP/IP is used like example of real implementation of the fundamental concepts of networks, without forgetting the protocols and implementations of different network architectures. Specificities are additionally introduced to understand how to adapt these concepts to new technologies like wireless networks. Special emphasis is put to understand the impact on both security and performance of current networking implementations.,English,- The course has two equally important components: theoretical lectures and practical laboratories. Laboratories not only illustrate the practical part of the most important concepts seen in the theoretical classes, but also they complement in themes that seek to give to students new skills useful in the practice of the profession.

Credits

4

Distribution

-

Instructor

Gordillo Ariza Gerardo

IMEC-4215 Advanced Thermodynamics

This course is intended for an academic semester of Mechanical Engineering graduate students. Its objective is to provide thermodynamics students with solids concepts of classical and statistical thermodynamics, since statistical thermodynamics includes classical results.  The course is organized in two basic sections. The first section includes classical thermodynamics concepts while the second section includes themes associated with the statistical thermodynamics. Classical section contains concepts such as state equations, first and second laws as well as their consequences and applications. Statistical section includes themes on gas kinetics, principles of both equilibrium statistical thermodynamics and classical and statistical thermodynamics, statistics of ideal gases, and finally, application of statistical models.

Credits

4

Distribution

-

- IMEC-4219

- IMEC-4221

- IMEC-4222

- IMEC-4223

IMEC-4400 Materiales y Manufactura

Distribution

-

IMEC-4401 Procesamiento de Polimeros

Credits

4

Distribution

-

- IMEC-4423

- IMEC-4424

- IMEC-4426

IMEC-4427 Computer Assisted Manufacturing

Credits

4

Distribution

-

IMEC-4428 IMEC-4428

Distribution

-

IMEC-4430 Caracterización Estructural de Sólidos Cristalinos y Amorfos

Credits

4

Distribution

-

- IMEC-4431

- IMEC-4432

IMEC-4433 Manufactura Aditiva: Tecnologias y Proceso

Credits

4

Distribution

-

IMEC-4503 Dinamica Avanzada

Credits

4

Distribution

-

- IMEC-4505

IMEC-4507 Dinamica Vehicular

Credits

4

Distribution

-

- IMEC-4512

- IMEC-4517

IMEC-4518 Computer Aided Mechanims Design

This course approaches the designg of mechanisms aided by computer tools, including existing commercial software and algorithms development. The course is a natural continuation of basic undergraduate courses in analysysis of mechanisms, since it deals with the analysis and synthesis cycle including kinematic, dynamic and manufacturing considerations. Performance indexes such as sensitivity, mechanical advantage and power indicators are introduced for the evaluation during the design process.

Credits

4

Distribution

-

IMEC-4520 IMEC-4520

Distribution

-

- IMEC-4521

IMEC-4522 Reliability Analysis and Data

Credits

4

Distribution

-

- IMEC-4524

IMEC-4600 Métodos de Diferencias Finitas Par Ecuaciones Diferenciales

Credits

4

Distribution

-

- IMEC-4602

IMEC-4604 Continuum Mechanics

Credits

4

IMEC-4605 Advanced Numerical Modelling For Heat Transfer In Cfd

Credits

4

Distribution

-

- IMEC-4606

IMEC-4607 IMEC-4607

Distribution

-

IMEC-4610 Rotorcraft Aerodynamics

Credits

4

Distribution

-

IMEC-4700 Seminario de Magíster

The scientific research is derived from a question or problem that has not been studied before, or the response of which is not satisfactory yet. A research is far more than a simple search for information, it is the consequence of the systematic application of the scientific method, with the final purpose of contributing to the solution of problems that affect society. A research requires goals, planning, hypotheses, critical assumptions and information generation and interpretation. 

The general purpose of this course is to provide students the tools for the sound exercise of research, within the framework of the scientific method. The articulation of these tools by students will be evaluated based on the research proposal and its defense before a panel of evaluators.

Credits

0

Distribution

-

IMEC-4701 Tesis 1

During this course, the student develops the theoretical framework of the thesis project and advances in the approach of the solutions to the selected problem.

Credits

4

Distribution

-

IMEC-4702 Tesis 2

The student enrolled in this course is finalizing the research project and presents the results to a group of experts. The student must fully build and / or develop the algorithms and analytical techniques to achieve research objectives. Likewise, the student must build and conduct the assembly needed to verify the proposed model from an experimental point of view.

Credits

8

Distribution

-

IMEC-4703 Tesis Doble Diploma

Credits

8

Distribution

-

IMEC-4800 Problema Especial de Magister

Project individually solved by the student under the advise of professors in the field of interest.

Credits

4

Distribution

-

- IMEC-4801

- IMEC-4990

IMEC-4992 Intercambio Internacional

Credits

0

Distribution

-

IMEC-4993 Intercambio Internacional Intersemestral

Credits

0

Distribution

-

IMEC-4994 Intership

The student enrolled in this course is developing an international research experience.

Credits

0

Distribution

-

IMEC-4994 Pasantia M-Imec

Credits

0

Distribution

-

IMEC-4997 IMEC-4997

Credits

0

Distribution

-

IMEC-6001 IMEC-6001

Distribution

-

IMEC-6002 Tutorial 1

Credits

4

Distribution

-

IMEC-6003 Tutorial 2

Credits

4

Distribution

-

IMEC-6007 Tutorial Especial

Credits

1

Distribution

-

IMEC-6402 Pasantía Semestral

The student enrolled in this course is developing an international research experience.

Credits

0

Distribution

-

IMEC-6403 Pasantía Intersemestral

Credits

0

Distribution

-

IMEC-6700 Seminar

Credits

0

Distribution

-

IMEC-6970 Examen de Propuesta Doctoral

Credits

0

Distribution

-

IMEC-6980 Tesis 4cr

Credits

4

Distribution

-

IMEC-6981 Thesis (8 CR)

The student registered in this course dedicates an equivalent time to 8 CR to advance in his research topic.

Credits

8

Distribution

-

IMEC-6982 Thesis (12 CR)

The student registered in this course dedicates an equivalent time to 12 CR to advance in his research topic.

Credits

12

Distribution

-

IMEC-6983 Thesis (16 CR)

The student registered in this course dedicates an equivalent time to 16 CR to advance in his research topic.

Credits

16

IMEC-6990 Sustentación de Tesis

Credits

0

Distribution

-

IMEC-6997 Pasantía Estudiantes Externos

Credits

0

Distribution

-

- $name

- $name

- $name

- $name

- $name

- $name

- $name

- $name

- $name

- $name

- $name

- Copia-de-IMECXXXX

- $name

- $name